Lnb Monoblocco Universale Quad Inverto Black
Disponibile su ordinazione
Specifically designed for the European DTH markets, this Monoblock LNB allows
for dual satellite reception. It can be used for satellite broadcast reception (on
an 80cm dish antenna) of any two satellites spaced with 6°. This LNB enables the
signal distribution to maximum four Set Top Boxes with Single Tuner (or two STBs
with Twin Tuner). It is optimized for High Definition transmissions and provides
excellent Noise Figure performance. Designed to meet strict specifications and manufactured
to the highest industry quality standards, this LNB is an ideal solution for satellite
broadcast reception across Europe.
• Low Phase Noise, DVBS2 (HDTV) compliant
• Low Noise Figure (0.2 dB)
• Low Power Consumption
• Very high Cross Polarization Isolation
• Very high Frequency Stability
Low Band Input Frequency Range 10.7 ~ 11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
Low Band LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100 ~ 2150 MHz
High Band LO Frequency 10.6 GHz
Noise Figure 0.2 dB Typ. (0.7 dB Max.)
LO Initial Accuracy +/- 1.0 MHz Max.
LO Temperature Drift +/- 3.0 MHz Max.
Phase Noise (@ 10 kHz) – 90 dBc / Hz Max.
Conversion Gain 50 ~ 65 dB
Gain Ripple (Over 26 MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band) +/- 4 dB Max.
Image Rejection 40 dB Min.
1 dB Compression Point (@ Output) 0.0 dBm Min.
Control: Satellite A/B Selection DiSEqC 1.0 (Sat A* = Hotbird 13° East,
Sat B = ASTRA 19.2° East)
Cross Polarization Isolation 22 dB Min.
Output VSWR 2.5 : 1
In-Band Spurious – 60 dBm Max.
Current Consumption 250 mA Max. @ 11 ~ 20 V
Operating Temperature – 30 °C ~ + 60 °C
Output Impedance 75 Ω
Output Connector F-Type (Female)
Weight 485 g
Recommended Dish Size 75 ~ 85 cm (F/D = 0.6)
Monoblock Mounting Bracket 23 mm